Easy Lay-down and roll-up of floor covers.
Our standard rack allows safe, fast and easy covering of the gym's surface. Roll-up and transport to storage area can be done by two people. Our racks are available in 6, 8 and 10-roller models.
- Four 8" non-marking urethane, swivel-type wheels can support up to 3,600 pounds of cover and rack
- Yellow safety bars and aluminum safety collars - prevent the roller from popping out, side-to-side movement and accidental finger pinching
- Blue vinyl end caps - protect from sharp edges
- Safety brake - placement and design make it easy to lock all wheels in place
- Rollers are 14-gauge galvanized steel and the entire frame is a mig-welded, all steel construction
- Six 8” diameter wheels reduce risk of damage to floor boards by distributing weight load (33% lower point load) and allow for easier rack movement.
- Safety leg extenders with two 3" wheels provide extra stability
- Storage trays to hold extra rolls of tape or the Power Winder
Included with all racks:
|Sizes||34” W x 14’2 ¼” L x 67”H for 10'-wide covers|
|Capacity||2,800 lbs. of GymGuard fabric|
|Rollers||2 1/2" diam., 14 gauge steel, lockable to prevent accidental unwinding|
|Frame||Mig-welded, all-steel construction|
|Brackets||Steel with Delrin roller bearings|
|Wheels||8" non-marking urethane swivel types, all with foot-locks|
|Rack Capacity||8 Rollers|